Product Test:
Toro Groundsmaster 7210

Share this story: Twitter | Facebook | LinkedIn

Product Test:
Toro Groundsmaster 7210
by James de Havilland

Manoeuvrable productivity

No matter how you do it, keeping grass in trim costs time and money. It’s no surprise that high output mowers are favoured in sectors from sports and fine turf through to parks and amenity areas. A problem for many, however, is not just the total area that needs to be mown, but access to those tight spots that are really difficult to get at. Manoeuvring to deal with these can compromise daily outputs or even lead to an increase in demand for pedestrian mowing. A possible solution is a mower like the Toro Groundsmaster 7210.

Zero-turn mowers have a long-established niche with users across many sectors, both the 7210 we’re testing here and its smaller horsepower series counterpart, the Groundsmaster 7200 have become established as dependable, rugged and economical choices. Sharing essentially the same chassis and running gear, the 24.8hp Groundsmaster 7200 and 36.8hp 7210 can be supplied with decks of up to 1.82m giving 72 inches of cut with rear discharge, proving the deck of choice on the more powerful 7210. This is the model we’re testing, although this model can be specified with a wide 2.54m deck with folding outer wings as one of several options.

The 7210 has been around long enough to have a strong following, but it can suffer from, as is often the case, being so familiar it gets overlooked. Zero-turn mowers tend to either have loyal users or those who just view the whole zero-turn concept as compromised. For others, a zero-turn is fine for small, awkward mowing but no good for wider areas. The perception that lever steering makes these mowers difficult to keep in a straight line, particularly across a slope, persists. Some still consider these mowers, in general, too ‘tricky’ to consider for general use.

A quick demonstration of a 7210 will not necessarily sell the concept either or dispel the misconception. Ten minutes into trying the 7210 for the first time in a couple of years, I found myself straying off-line and the first few tight turns proved a jerky, turf tearing mess. It takes more than a little time to familiarise yourself with the controls, despite Toro having the travel come steering lever response on the 7210 really nicely balanced. Suggesting anyone can just jump on the machine and expect to deliver a smooth and accurate mow is misleading. That takes practice.

Second nurture and intuitive

Handing over the reins to Chris, he demonstrated how working the steering levers needs balance in a really tight turn, matching the speed of the outer driven wheel to a touch of reverse on the inner one to achieve a scuff-free about-face turn. Bringing the mower around so it is parallel to the previous pass does take a little bit of practice. This makes the task sound difficult when in fact it is pretty much something you ‘re-remember’, if you are familiar with the ‘skid-steer’ steering concept. It becomes second nature and intuitive, just do not expect to master the concept immediately.

Tricks made easy

So how do you demonstrate the performance gains a 7210 can offer over a typical out-front rotary such as a Groundsmaster 3200? With difficulty is the short answer. Everything will hinge around what needs to be mown. A large square area is an easy cut. The same area with obstacles, tight dead-end turns and awkward boundaries is something else all-together. In a straight ‘fight’, an out-front rotary may possibly have the edge for the former, a zero-turn winning out for the latter.

Inclement weather pretty much prevented us trying the 7210 in the tight formal areas that would have proven not just its agility but how it can turn tightly and cleanly within pretty much its own length. The open ground we could access did present a few challenges, however, and here the ability to pretty much mow ‘square’ into corners and turn back onto a narrow path without shuttling highlighted a key zero-turn plus.

Seeing is believing

Is a zero-turn mower the answer to your specific mowing needs? On the evidence of a brief test run over less challenging work it is difficult to say. The main consideration is that there are choices that can make a model like the Groundsmaster 7210 well worth putting on your list to try. Give the mower a chance. You need to work with the mower and understand it to exploit its performance enhancing agility.